Netgear GS728TPP User Manual download pdf (Page 98)

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

Table 14. CST Status Information.

Field Description

Interface Select a physical or port channel interface to configure. The port is

associated with the VLANs associated with the CST

Port Role Each MST Bridge Port that is enabled is assigned a port role for each

spanning tree.

The port role can be one of the following values: Root,

Designated, Alternate, Backup, Master, or Disabled.

Designated Root Root bridge for the CST. It is made up using the bridge priority and the base

MAC address of the bridge.

Designated Cost Displays cost of the port participating in the STP topology. Ports with a lower

cost are less likely to be blocked if STP detects loops.

Designated Bridge Bridge identifier of the bridge with the designated port. It is made up using

the bridge priority and the base MAC address of the bridge.

Designated Port Port identifier on the designated bridge that offers the lowest cost to the

LAN. It is made up from the port priority and the interface number of the port.

Edge Port Indicates whether the port is enabled as an edge port. Possible values are

Enabled and Disabled.

Point-to-point MAC Derived value of the point-to-point status.

CST Regional Root Displays the bridge priority and base MAC address of the CST regional root.

CST Path Cost Displays the path cost to the CST tree regional root.

Port Forwarding State Displays the forwarding state of this port.

Rapid STP

Use the Rapid STP screen to view information about Rapid Spanning Tree (RSTP) port

status.

To display the Rapid STP screen, select Switching  STP  Advanced  RSTP.

The following screen displays:

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 276 277

No comments

Netgear GS728TPP User Manual Page 98