Netgear GS728TPP User Manual download pdf (Page 168)

168

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

3. From the list in the 1 column, select the HTTPS authentication method that must appear first

in the selected authentication login list.

If you select a method that does not time out as the first method, such as local, no other

method is attempted, even if you have specified more than one method. This parameter

does not appear when you first create a login list. User authentication occurs in the order

the methods are selected. Possible methods are as follows:

• Local. The user's locally stored ID and password is used for authentication. Since the

local method does not time out, if you select this option as the first method, no other

method is tried, even if you have specified more than one method.

• RADIUS. The user's ID and password is authenticated using the RADIUS server. If

you select RADIUS or TACACS+ as the first method and an error occurs during the

authentication, the switch uses Method 2 to authenticate the user.

• TACACS+. The user's ID and password is authenticated using the TACACS+ server.

If you select RADIUS or TACACS+ as the first method and an error occurs during the

authentication, the switch attempts user authentication method 2.

• None. The authentication method is unspecified. This option is available only for

method 2 and method 3.

Note: Each authentication protocol can use up to three authentication

methods. Local and None must be the last methods. You cannot

configure methods after these two options.

4. From the list in the 2 column, select the authentication method, if any, that must appear

second in the selected authentication login list.

Use this method if the first method times out.

If you select a method that does not time out as the second method, the third method is

not tried. This parameter does not appear when you first create a login list.

5. From the list in the 3 column, select the authentication method, if any, that must appear third

in the selected authentication login list.

This parameter does not appear when you first create a login list.

6. Click APPLY to update the switch with the HTTPS Authentication settings.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 276 277

No comments

Netgear GS728TPP User Manual Page 168