Netgear GS728TPP User Manual download pdf (Page 123)

123

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches

 To search for an entry in the MAC Address Table:

1. Select Switching Address Table  Basic  Address Table.

The following screen displays:

2. In the Search By field, select whether to search for MAC addresses by MAC address, VLAN

ID, or interface.

• MAC Address: Select MAC

Address and enter a 6-byte hexadecimal MAC address

in 2-digit groups separated by colons, then click GO. If the address exists, that entry

is displayed. An exact match is required.

• VLAN ID: Select VLAN ID and enter the VLAN ID, for example, 100.

Then click GO. If

any entries with that VLAN ID exist they are displayed.

• Interface: Select Interface, enter the interface ID in g1, g2... format, then, click GO. If

any entries learned on that interface exist, they are displayed.

Click CLEAR to clear dynamic MAC addresses in the table.

The following table describes the information available for each entry in the address table.

Table 21. MAC Address Table Fields.

Field Description

VLAN ID Specifies the VLAN ID on which the IGMP snooping querier is

administratively enabled and for which the VLAN exists in the VLAN

database.

MAC Address A unicast MAC address for which the switch has forwarding or filtering

information.

The format is a 6-byte MAC address with each byte separated

by colons. For example, 00:0F:89:AB:CD:EF.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 276 277

No comments

Netgear GS728TPP User Manual Page 123