Netgear GS724TS-100NAS User Manual download pdf (Page 85)

Chapter 3: Configuring Switching Information | 85

GS716Tv2 and GS724Tv3 Software Administration Manual

6. Specify how you want the port to handle untagged and priority tagged frames. Whichever

you select, VLAN tagged frames will be forwarded in accordance with the IEEE 802.1Q

VLAN standard. The factory default is Admit All.

• VLAN Only: The port will discard any untagged or priority tagged frames it receives.

• Admit All: Untagged and priority tagged frames received on the port will be accepted

and assigned the value of the Port VLAN ID for this port.

7. Specify how you want the port to handle tagged frames:

• Enable: A tagged frame will be discarded if this port is not a member of the VLAN

identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port

VLAN ID specified for the port that received this frame.

• Disable: All frames are forwarded in accordance with the IEEE 802.1Q VLAN

standard. The factory default is Disable.

8. Specify the default 802.1p priority assigned to untagged packets arriving at the port. Possible

values are 0–7.

9. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

10. If you make any changes to this page, click Apply to send the updated configuration to the

switch. Configuration changes take place immediately.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 85