Netgear GS724TS-100NAS User Manual download pdf (Page 125)

Chapter 3: Configuring Switching Information | 125

GS716Tv2 and GS724Tv3 Software Administration Manual

Note: IEEE 802.1D recommends a default of 300 seconds, which is the

factory default.

2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

3. Click Apply to apply to send the updated configuration to the switch. Configuration changes

take effect immediately.

Static MAC Address

Use the Static MAC Address Configuration page to configure and view static MAC addresses

on an interface.

To access the Static MAC Address Configuration page, click Switching Address Table 

Advanced  Static MAC Address.

To configure a static MAC address:

1. To add a static MAC address entry

a. Select the VLAN ID corresponding to the MAC address to add.

b. Specify the MAC address to add.

c. Specify the interface associated with the MAC address.

d. Click Add.

2. To delete a static MAC address, select the check box next to the entry and click Delete.

3. To modify the settings for a static MAC address, select the check box next to the entry,

update the desired values, and click Apply.

4. Click Refresh to reload the page and display the latest MAC address learned on a specific

port.

5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 125