Netgear GS724TS-100NAS User Manual Page 163

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 162
Chapter 5: Managing Device Security | 163
GS716Tv2 and GS724Tv3 Software Administration Manual
The currently configured value is shown when the Web page is displayed. The default
value is Disable. You can only download SSL certificates when the HTTPS Admin mode
is disabled.
2. Use the radio buttons in the SSL Version 3 field to enable or disable Secure Sockets Layer
Version 3.0. The currently configured value is shown when the Web page is displayed. The
default value is Enable.
3. Use the radio buttons in the TLS Version 1 field to enable or disable Transport Layer
Security Version 1.0. The currently configured value is shown when the Web page is
displayed. The default value is Enable.
4. In the HTTPS Port field, specify the TCP port to use for HTTPS data. The value must be in
the range of 1–65535. Port 443 is the default value. The currently configured value is shown
when the Web page is displayed.
5. In the HTTPS Session Soft Timeout field, specify the number of minutes an HTTPS
session can be idle before a timeout occurs.
After the session is inactive for the configured amount of time, the administrator is
automatically logged out and must re-enter the password to access the management
interface. A value of zero corresponds to an infinite timeout. The default value is 5
minutes. The currently configured value is shown when the Web page is displayed.
6. In the HTTPS Session Hard Timeout field, specify the number of hours an HTTPS session
can remain active, regardless of session activity. The value must be in the range of (1–168)
hours. The default value is 24 hours. The currently configured value is shown when the Web
page is displayed.
7. In the Maximum Number of HTTPS Sessions field, specify the maximum number of
HTTPS sessions that can be open at the same time. The value must be in the range of
(0–2). The default value is 2. The currently configured value is shown when the Web page is
displayed.
8. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
9. If you make changes to the page, click Apply to apply the changes to the system.
Certificate Download
For the Web server on the switch to accept HTTPS connections from a management station,
the Web server needs a public key certificate. You can generate a certificate externally (for
example, off-line) and download it to the switch.
To display the Certificate Download page, click Security Access, and then click the HTTPS
Certificate Download link.
Downloading SSL Certificates
Before you download a file to the switch, the following conditions must be true:
The file to download from the TFTP server is on the server in the appropriate directory.
The file is in the correct format.
The switch has a path to the TFTP server.
Page view 162
1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 274 275

Comments to this Manuals

No comments