Netgear GS724TS-100NAS User Manual download pdf (Page 51)

Chapter 2: Configuring System Information | 51

GS716Tv2 and GS724Tv3 Software Administration Manual

SNMP v3 User Configuration

This is the configuration for SNMP v3.

To access this page, click System  SNMP  SNMP V3  User Configuration.

The SNMPv3 Access Mode is a read-only field that shows the access privileges for the user

account. The admin account always has Read/Write access, and all other accounts have

Read Only access.

To configure SNMPv3 settings for the user account:

1. In the Authentication Protocol field, specify the SNMPv3 Authentication Protocol setting

for the selected user account. The valid Authentication Protocols are None, MD5, or

SHA. If you select:

• None: The user will be unable to access the SNMP data from an SNMP browser.

• MD5 or SHA: The user login password will be used as SNMPv3 authentication

password, and you must therefore specify a password. The password must be eight

characters in length.

2. In the Encryption Protocol field, choose whether to encrypt SNMPv3 packets transmitted by

the switch.

• None. Do not encrypt the contents of SNMPv3 packets transmitted from the switch.

• DES. Encrypt SNMPv3 packets using the DES encryption protocol.

3. If you selected DES in the Encryption Protocol field, enter the SNMPv3 Encryption Key here.

Otherwise, this field is ignored. Valid keys are 0 to 15 characters long.

4. Click Apply to send the updated configuration to the switch. Configuration changes take

effect immediately.

5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 51