Netgear GS724TS-100NAS User Manual download pdf (Page 44)

44 | Chapter 2: Configuring System Information

GS716Tv2 and GS724Tv3 Software Administration Manual

To configure the global DNS settings:

1. Specify whether to enable or disable the administrative status of the DNS Client.

• Enable. Allow the switch to send DNS queries to a DNS server to resolve a DNS

domain name.

• Disable. Prevent the switch from sending DNS queries.

2. Enter the DNS default domain name to include in DNS queries. When the system is

performing a lookup on an unqualified hostname, this field is provided as the domain name

(for example, if default domain name is netgear.com and the user enters test, then test is

changed to test.netgear.com to resolve the name).

3. To specify the DNS server to which the switch sends DNS queries, enter an IP address in

standard IPv4 dot notation in the DNS Server Address and click Add. The server appears

in the list below. You can specify up to eight DNS servers. The precedence is set in the order

created.

4. To remove a DNS server from the list, select the check box next to the server you want to

remove and click Delete. If no DNS server is specified, the check box is global and will

delete all the DNS servers listed.

5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

6. Click Apply to send the updated configuration to the switch. Configuration changes take

effect immediately.

Host Configuration

Use this page to manually map host names to IP addresses or to view dynamic DNS

mappings.

To access this page, click System  Management  DNS  Host Configuration.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 44