Netgear GS724TS-100NAS User Manual download pdf (Page 42)

42 | Chapter 2: Configuring System Information

GS716Tv2 and GS724Tv3 Software Administration Manual

To configure the Auto-DoS feature:

1. Select a radio button to enable or disable Auto-DoS:

• Disable. Auto-DoS is disabled (default).

• Enable. Auto-DoS is enabled.

2. Click Apply to send the updated configuration to the switch. Configuration changes occur

immediately.

3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

DoS Configuration

The DoS Configuration page lets you to select which types of DoS attacks for the switch to

monitor and block.

To access the DoS Configuration page, click System  Management  Denial of Service >

DoS Configuration.

To configure individual DoS settings:

1. Select the types of DoS attacks for the switch to monitor and block and configure any

associated values, as the following list describes.

• Denial of Service SIP=DIP. Enable or disable this option by selecting the appropriate

radio button. Enabling SIP=DIP DoS prevention causes the switch to drop packets

that have a source IP address equal to the destination IP address. The factory default

is Disable.

• Denial of Service First Fragment. Enable or disable this option by selecting the

appropriate radio button. Enabling First Fragment DoS prevention causes the switch

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 42