Netgear GS724TS-100NAS User Manual download pdf (Page 33)

Chapter 2: Configuring System Information | 33

GS716Tv2 and GS724Tv3 Software Administration Manual

To define system information:

1. Open the System Information page.

2. Define the following fields:

• System Name. Enter the name you want to use to identify this switch. You may use

up to 31 alphanumeric characters. The factory default is blank.

• System Location. Enter the location of this switch. You may use up to 31

alphanumeric characters. The factory default is blank.

• System Contact. Enter the contact person for this switch. You may use up to 31

alphanumeric characters. The factory default is blank.

3. Click Apply.

The system parameters are applied, and the device is updated.

The following table describes the status information the System Page displays.

IP Configuration

Use the IP Configuration page to configure network information for the management

interface, which is the logical interface used for in-band connectivity with the switch through

any of the switch's front panel ports. The configuration parameters associated with the

switch's network interface do not affect the configuration of the front panel ports through

which traffic is switched or routed.

To access the page, click System  Management  IP Configuration. A screen similar to the

following displays.

Field Description

Serial Number The serial number of the switch.

System Object ID The base object ID for the switch's enterprise MIB.

Date & Time The current date and time.

System Up Time Displays the number of days, hours, and minutes since the last system

restart.

Base MAC Address The universally assigned network address.

Model Name The model name of the switch.

Boot Version The boot code version of the switch.

Software Version The software version of the switch.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 33