Netgear GS724TS-100NAS User Manual download pdf (Page 39)

Chapter 2: Configuring System Information | 39

GS716Tv2 and GS724Tv3 Software Administration Manual

Click Refresh to refresh the page with the most current data from the switch.

SNTP Server Configuration

Use the SNTP Server Configuration page to view and modify information for adding and

modifying Simple Network Time Protocol SNTP servers.

To display the SNTP Server Configuration page, click System  Management  Time  SNTP

Server Configuration.

To configure a new SNTP Server:

1. Enter the appropriate SNTP server information in the available fields:

• Server Type. Specifies whether the address for the SNTP server is an IP address

(IPv4) or hostname (DNS).

• Address. Enter the IP address or the hostname of the SNTP server.

• Port. Enter a port number on the SNTP server to which SNTP requests are sent. The

valid range is 1–65535. The default is 123.

Reference Clock Id Specifies the reference clock identifier of the server for the last received valid

packet.

Server Mode Specifies the mode of the server for the last received valid packet.

Unicast Sever Max Entries Specifies the maximum number of unicast server entries that can be

configured on this client.

Unicast Server Current

Entries

Specifies the number of current valid unicast server entries configured for

this client.

Field Description

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 39