Netgear GS724TS-100NAS User Manual Page 83

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 82
Chapter 3: Configuring Switching Information | 83
GS716Tv2 and GS724Tv3 Software Administration Manual
Tag All: Select the ports on which all frames transmitted for this VLAN will be tagged.
All the ports will be included in the VLAN.
Remove All: This selection has the effect of excluding all ports from the selected
VLAN.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take place immediately.
Port VLAN ID Configuration
The Port PVID Configuration screen lets you assign a port VLAN ID (PVID) to an interface.
There are certain requirements for a PVID:
All ports must have a defined PVID.
If no other value is specified, the default VLAN PVID is used.
If you want to change the port’s default PVID, you must first create a VLAN that includes
the port as a member.
Use the Port VLAN ID (PVID) Configuration page to configure a virtual LAN on a port.
To access the Port PVID Configuration page, click Switching VLAN Advanced Port
PVID Configuration.
Page view 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 274 275

Comments to this Manuals

No comments