Netgear GS724TS-100NAS User Manual download pdf (Page 140)

140 | Chapter 4: Configuring Quality of Service

GS716Tv2 and GS724Tv3 Software Administration Manual

• Destination IP Address. Requires a packet’s destination port IP address to match

the address listed here. In the IP Address field, enter a valid destination IP address in

dotted decimal format.

• Destination Mask. Enter a valid subnet mask to determine which bits in the IP

address are significant. This is not a wildcard mask.

• Destination L4 Port. Requires a packet’s TCP/UDP destination port to match the port

you select. Select the desired L4 keyword from the list on which the rule can be

based. If you select Other, the screen refreshes and a Port ID field appears. Enter a

user-defined Port ID by which packets are matched to the rule.

• IP DSCP. Matches the packet’s DSCP to the class criteria’s when selected. Select the

DSCP type from the menu or enter a DSCP value to match. If you select Other, enter

a custom value in the DSCP Value field that appears.

• IP Precedence. Matches the packet’s IP Precedence value to the class criteria’s

when Enter a value in the range of 0–7.

• IP ToS. Matches the packet’s Type of Service bits in the IP header to the class

criteria’s when selected and a value is entered. In the ToS Bits field, enter a two-digit

hexadecimal number to match the bits in a packet’s ToS field. In the ToS Mask field,

specify the bit positions that are used for comparison against the IP ToS field in a

packet.

3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

4. If you change any of the settings on the page, click Apply to send the updated configuration

to the switch. Configuration changes occur immediately.

5. Click Refresh to refresh the page with the most current data from the switch.

Policy Configuration

Use the Policy Configuration page to associate a collection of classes with one or more policy

statements. After creating a Policy, click the policy link to the Policy page.

To display the page, click QoS  DiffServ  Advanced  Policy Configuration.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 274 275

No comments

Netgear GS724TS-100NAS User Manual Page 140