Netgear GS724TS-100NAS User Manual Page 219

  • Download
  • Add to my manuals
  • Print
  • Page
    / 275
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 218
Chapter 6: Monitoring the System | 219
GS716Tv2 and GS724Tv3 Software Administration Manual
3. To modify the settings for an existing host, select the check box next to the host, change the
desired information, and click Apply.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
The Status field in the Server Configuration table shows whether the remote logging host is
currently active.
Trap Logs
Use the Trap Logs page to view information about the SNMP traps generated on the switch.
To access the Trap Logs page, click the Monitoring Logs tab, and then click the Trap Logs
link.
The following table describes the Trap Log information displayed on the screen.
The page also displays information about the traps that were sent.
Field Description
Number of Traps Since
Last Reset
The number of traps that have occurred since the switch last reboot.
Trap Log Capacity The maximum number of traps stored in the log. If the number of traps exceeds the
capacity, the entries will overwrite the oldest entries.
Number of Traps Since
Log Last Viewed
The number of traps that have occurred since the traps were last displayed.
Displaying the traps by any method (such as terminal interface display, Web
display, or upload file from switch) will cause this counter to be cleared to 0.
Page view 218
1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 274 275

Comments to this Manuals

No comments