Netgear SRX5308 User Manual Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 460
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
IPv4 and IPv6 Internet and WAN Settings
32
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
If the autodetect process senses a connection method that requires input from you, it
prompts you for the information. The following table explains the settings that you
might have to enter:
If the
autodetect process does not find a connection, you are prompted either to
check the physical connection between your VPN firewall and the cable, DSL line, or
satellite or wireless Internet dish, or to check your VPN firewall’s MAC address. For
more information, see Configure Advanced WAN Options
and Other Tasks on
page 67 and Troubleshoot the ISP Connection on p
age 388.
4. V
erify the connection:
a. Select Network
Configuration > WAN Settings > WAN Setup. The WAN Setup
screen displays the IPv4 settings (see Figure 11 on
page 30).
b. In the Action
column, click the Status button of the WAN interface for which you
want to display the Connection Status pop-up screen. (The following figure shows a
static IP address configuration.)
Table 2. IPv4 Internet connection methods
Connection Method Manual Data Input Required
DHCP (Dynamic IP) No manual data input is required.
PPPoE The following fields are required:
• Login
• Password
• Account Name
• Domain Name
PPTP The following fields are required:
• Login
• Password
• Account Name
• Domain Name
• My IP Address
• Server IP Address
Fixed (Static) IP The following fields are required:
• IP Address
• IP Subnet Mask
• Gateway IP Address
• Primary DNS Server
• Secondary DNS Server
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 459 460

Comments to this Manuals

No comments