Netgear SRX5308 User Manual download pdf (Page 349)

Monitor System Access and Performance

349

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

3. Click Apply to save your settings.

4. If you

want to enable the traffic meter for another WAN interface, click the associated WAN

Traffic Meter tab for that interface, and repeat Step 2 and Step 3 for that WAN interface.

The contents of the WAN2 Traffic Meter, WAN3 Traffic Meter, and WAN4 Traffic Meter

scre

ens are identical to the WAN1 Traffic Meter screen except for the WAN interface number.

To display a report of the Internet traffic by type for a

WAN interface, click the Traffic by

Protocol option arrow in the upper right of the associated WAN Traffic Meter screen. The

Traffic by Protocol pop-up screen displays. The incoming and outgoing volume of traffic for

each protocol and the total volume of traffic are displayed. Traffic counters are updated in

MBs; the counter starts only when traffic passed is at least 1 MB. In addition, the pop-up

Do you want to

enable Traffic

Metering on WAN1?

(continued)

Monthly Limit Enter the monthly traffic volume limit in MB. The default setting is

0 MB.

Increase this

month limit by

Select this check box to temporarily increase a previously

specified

monthly traffic volume limit, and enter the additional

allowed volume in MB. The default setting is 0 MB.

Note: When you click Apply to save these settings, this field is

reset

to 0 MB so that the increase is applied only once.

This month limit This is a nonconfigurable field that

displays the total monthly

traffic volume limit that applies to this month. This total is the sum

of the monthly traffic volume and the increased traffic volume.

Traffic Counter

Restart Traffic

Coun

ter

Select one of the following radio buttons to specify when the traffic counter restarts:

• Rest

art Traffic Counter Now. Select this option, and click Apply at the bottom of

the screen to restart the traffic counter immediately.

• R

estart Traffic Counter at a Specific Time. Restart the traffic counter at a

specific time and day of the month. Fill in the time fields, and select AM or PM and

the day of the month from the drop-down lists.

Send e-mail report

before rest

arting

counter

An email report is sent immediately before the counter restarts. Ensure that emailing

of logs is enabled on the Firewall Logs & E-mail screen (see Configure Logging,

Alerts, and Event Notifications on p

age 353).

When Limit is reached

Block Traffic Select one of the following radio buttons to specify which action the VPN firewall

performs when the traffic limit has been reached:

• Block All T

raffic. All incoming and outgoing Internet and email traffic is blocked.

• B

lock All Traffic Except E-Mail. All incoming and outgoing Internet traffic is

blocked, but incoming and outgoing email traffic is still allowed.

Send e-mail alert An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled

the Firewall Logs & E-mail screen (see Configure Logging, Alerts, and Event

Notifications o

n page 353).

Table 87. WAN1 Traffic Meter screen settings (continued)

Setting Description

1 2 ... 344 345 346 347 348 349 350 351 352 353 354 ... 459 460

Comments to this Manuals

No comments

Netgear SRX5308 User Manual Page 349

Comments to this Manuals

Related products and manuals for Routers Netgear SRX5308