Netgear SRX5308 User Manual download pdf (Page 42)

100

101

IPv4 and IPv6 Internet and WAN Settings

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

Figure 22.

4. Configure the protocol binding settings as explained in the following table:

Table 6. Add Protocol Binding screen settings

Setting Description

Service From the drop-down list, select a service or application to be covered by this rule. If the

service or application does not appear in the list, you need to define it using the Services

screen (see Add Customized Services on page 172).

Local Gateway From the drop-down list, select one of the WAN interfaces.

Source Network The source network settings determine which computers on your network are affected by

this rule. Select one of the following options from the drop-down list:

Any All devices on your LAN.

Single address In the Start IP field, enter the IP address to which the rule is applied.

Address Range In the Start IP field and End IP field, enter the IP addresses for the

range to which the rule is applied.

Group If this option is selected, the rule is applied to the selected group.

The group can be a LAN group or an IP (LAN) group.

Note: For information about LAN groups, see Manage IPv4 Groups

and Hosts (IPv4 LAN Groups) on page 91. For information about IP

groups, see Create IP Groups on pa

ge 174.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 459 460

Comments to this Manuals

No comments

Netgear SRX5308 User Manual Page 42

Comments to this Manuals

Related products and manuals for Routers Netgear SRX5308