Netgear SRX5308 User Manual Page 404

  • Download
  • Add to my manuals
  • Print
  • Page
    / 460
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 403
404
B
B. Network Planning for Multiple WAN
Ports (IPv4 Only)
This appendix describes the factors to consider when planning a network using a firewall that
has more than one WAN port.
This appendix contains the following sections:
What to Consider Before You Begin
Overview of the Planning
Process
Inbound Traffic
Virtual Private Networks
What to Consider Before You Begin
Cabling and Computer Hardware Requirements
Computer Network Configuration Requirements
Internet Configuration Requirements
The VPN firewall is a powerful and versatile
solution for your networking needs. To make the
configuration process easier and to understand all of the choices that are available to you,
consider the following before you begin:
1. Plan your network.
a. De
termine whether you will use one or several WAN ports. For one WAN port, you
might need a fully qualified domain name either for convenience or to remotely
access a dynamic WAN IP address.
b. If you intend
to use several WAN ports, determine whether you will use them in
auto-rollover mode for increased system reliability or load balancing mode for
maximum bandwidth efficiency. See the topics in this appendix for more information.
Your decision has the following implications:
Fully qua
lified domain name (FQDN)
- For auto-rollover mod
e, you will need an FQDN to implement features such as
exposed hosts and virtual private networks.
- For loa
d balancing mode, you might still need an FQDN either for
convenience or to remotely access a dynamic WAN IP address.
Page view 403
1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 459 460

Comments to this Manuals

No comments