Netgear SRX5308 User Manual Page 153

  • Download
  • Add to my manuals
  • Print
  • Page
    / 460
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 152
Firewall Protection
153
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv6 DMZ WAN Inbound Service Rules
To create a new IPv6 DMZ WAN inbound rule:
1. In the upper
right of the DMZ WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 79 on p
age 149).
2. Click the Ad
d table button under the Inbound Services table. The Add DMZ WAN Inbound
Service screen for IPv6 displays:
Figure 83.
3. Enter the settings as explained in Table 33 on page 137. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down
lists:
DMZ Users
W
AN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
m
ake selections from the following drop-down list:
Select
Schedule
4. Click App
ly to save your changes. The new rule is now added to the Inbound Services
table.
Configure LAN DMZ Rules
Create LAN DMZ Outbound Service Rules
Create LAN DMZ Inbound Service Rules
The LAN DMZ Rules screen allows you to create rules th
at define the movement of traffic
between the LAN and the DMZ. The default outbound and inbound policies are to block all
traffic between the local LAN and DMZ network. You can then apply firewall rules to allow
specific types of traffic either going out from the LAN to the DMZ (outbound) or coming in
from the DMZ to the LAN (inbound).
Page view 152
1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 459 460

Comments to this Manuals

No comments