Netgear SRX5308 User Manual Page 193

  • Download
  • Add to my manuals
  • Print
  • Page
    / 460
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 192
Firewall Protection
193
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 116.
2. In the Add Port Triggering Rule section, enter the settings as explained in the following table:
3. Click the Add
table button. The new port triggering rule is added to the Port Triggering Rules
table.
To edit a port triggering rule:
1. I
n the Port Triggering Rules table, click the Edit table button to the right of the port
triggering rule that you want to edit. The Edit Port Triggering Rule screen displays.
2. Mo
dify the settings that you wish to change (see the previous table).
3. Click Apply t
o save your changes. The modified port triggering rule is displayed in the Port
Triggering Rules table.
Table 41. Port Triggering screen settings
Setting Description
Name A descriptive name of the rule for identification and management purposes.
Enable From the drop-down list, select Ye
s to enable the rule. (You can define a rule but not
enable it.) The default setting is No.
Protocol From the drop-down list, select the protocol to which the rule applies:
TCP. The
rule applies to an application that uses the Transmission Control
Protocol (TCP).
UD
P. The rule applies to an application that uses the User Datagram Protocol
(UDP).
Outgoing Ports Start Port The start port (1025–65535) of the range for triggering.
End Port The end port (1025–65535) of the range for triggering.
Incoming Ports Start Port The start port (1025–65535) of the range for responding.
End Port The end port (1025–65535) of the range for responding.
Page view 192
1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 459 460

Comments to this Manuals

No comments