Netgear SRX5308 User Manual Page 348

  • Download
  • Add to my manuals
  • Print
  • Page
    / 460
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 347
Monitor System Access and Performance
348
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 223.
2. Enter the settings for the WAN1 interface as explained in the following table. If you want to
configure the settings for another WAN interface, first select the associated tab for that
interface.
Table 87. WAN1 Traffic Meter screen settings
Setting Description
Enable Traffic Meter
Do you want to
en
able Traffic
Metering on WAN1?
Select one of the following radio buttons to configure traffic metering:
Ye
s. Traffic metering is enabled, and the traffic meter records the volume of
Internet traffic passing through the WAN interface. Complete the fields that are
shown on the right side of the screen (see explanations later in this table).
No. T
raffic metering is disabled. This is the default setting.
Select one of the following radio
buttons to specify if or how the VPN firewall applies
restrictions when the traffic limit is reached:
No
Limit. No restrictions are applied when the traffic limit is reached.
Do
wnload only. Restrictions are applied to incoming traffic when the traffic limit is
reached. Fill in the Monthly Limit field.
Both Direc
tions. Restrictions are applied to both incoming and outgoing traffic
when the traffic limit is reached. Fill in the Monthly Limit field.
Page view 347
1 2 ... 343 344 345 346 347 348 349 350 351 352 353 ... 459 460

Comments to this Manuals

No comments