Netgear SRX5308 User Manual download pdf (Page 123)

100

101

LAN Configuration

123

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

Figure 66.

2. Click the Add table button under the Static Routes table. The Add Static Route screen

displays:

Figure 67.

3. Enter the settings as explained in the following table:

Table 28. Add Static Route screen settings for IPv4

Setting Description

Route Name The route name for the static route (for purposes of identification and

management).

Active To make the static route effective, select the Active check box.

Note: A route can be added to the table and made inactive if not needed. This

allows you to use routes as needed without deleting and re-adding the entry. An

inactive route is not advertised if RIP is enabled.

Private If you want to limit access to the LAN only, select the Private check box. Doin

g so

prevents the static route from being advertised in RIP.

Destination IP Address The destination IP address of the host or network to which the route leads.

Subnet Mask The IP subnet mask of the host or network to which the route leads. If the

destination is a single host, enter 255.255.255.255.

Interface From the drop-down list, select the physical or virtual network interface (the WAN1,

WAN2, WAN3, or WAN4 interface, a VLAN, or the DMZ interface) through which

the route is accessible.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 459 460

Comments to this Manuals

No comments

Netgear SRX5308 User Manual Page 123

Comments to this Manuals

Related products and manuals for Routers Netgear SRX5308