Netgear SRX5308 User Manual Page 49

  • Download
  • Add to my manuals
  • Print
  • Page
    / 460
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 48
IPv4 and IPv6 Internet and WAN Settings
49
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
domain, and restores DNS requests for the resulting fully qualified domain name (FQDN) to
your frequently changing IP address.
After you have configured your account information on the VPN firewall, when your
ISP-assigned IP address changes, your VPN firewall automatically contacts your DDNS
service provider, logs in to your account, and registers your new IP address. Consider the
following:
For auto-rollover mode, you need a fully qualified domain name (FQDN) to implement
features such as exposed hosts and virtual private networks regardless of whether you
have a fixed or dynamic IP address.
For load ba
lancing mode, you might still need a fully qualified domain name (FQDN)
either for convenience or if you have a dynamic IP address.
Note: If your ISP assigns a private WAN IP address such as 192.168.x.x
or 10.x.x.x, the DDNS service does not work because private
addresses are not routed on the Internet.
To configure DDNS:
1. Select Network Configuratio
n > Dynamic DNS. The Dynamic DNS screen displays
(see the following figure).
The WAN Mode section on the screen reports the currently configured WAN mode (for
e
xample, Single Port WAN1, Load Balancing, or Auto Rollover). Only those options that
match the configured WAN mode are accessible on the screen.
2. Click the submenu t
ab for your DDNS service provider:
Dynamic DNS for Dyn
DNS.org (which is shown in the following figure)
DNS TZO for TZO.com
DNS Or
ay for Oray.net
3322 DDNS for 332
2.org
Page view 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 459 460

Comments to this Manuals

No comments