Netgear RH348 User Manual download pdf (Page 65)

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

Remote Node Configuration 5-3

Pri(mary) Phone

Number and

Sec(ondary)

Phone Number

Both the Primary and Secondary Phone numbers refer to the number that the

router dials to connect to the remote node. The router calls the remote node using

the Primary Phone number ﬁrst. If the Primary Phone number is busy or does not

answer, the router calls the Secondary Phone number if available. Note that the

secondary number is not necessarily the number your router will dial to add

additional bandwidth for a Multilink call. If the called router supports BACP, that

router will provide the dial number for a second call. In North America, NETGEAR

recommends that you enter 1 and the area code with the number, even if it is a

local call. Otherwise, in some areas, the call is placed as a 56K call.

Edit PPP Options To edit the PPP options for this remote node, move the cursor to this ﬁeld, use the

space bar to select Yes, and press [Enter] to display Menu 11.2 - Remote Node

PPP Options. For more information about conﬁguring PPP options, see “Editing

PPP Options” on page 5-4.

Rem IP Addr This ﬁeld is required on all remote nodes except the ISP node. Enter the IP address

of the router at the remote site. A static route will be created to the network address

of that router. Note that if the remote network uses a netmask other than the

standard class netmask, you must enter the netmask in the Edit IP Options

submenu.

Edit IP Options This ﬁeld edits the parameters of the TCP/IP protocol. Select Yes and press [Enter]

to display Menu 11.3 - Remote Node Network Layer Options. For more information

about this screen, refer to Chapter 7, “TCP/IP Conﬁguration.”

Telco Options:

Transfer Rate When establishing a call in North America, your router speciﬁes a data rate and the

type of call based on this ﬁeld. Three options are available for this ﬁeld:

• 64K—The router places a 64 Kbps (kilobits per second) digital data call (default).

• 56K—The router places a 56 Kbps digital data call.

• DOVBS—The router places a 56 Kbps data over voice bearer service (DOVBS)

call. Some phone companies in North America charge less if calls are made

using DOVBS.

Allocated

Budget (min)

This ﬁeld sets a budget on outgoing call time for the remote node. The default for

this ﬁeld is 0 for no budget control.

Period (hr) This ﬁeld sets the time interval to reset the above outgoing call budget control.

Table 5-1. Menu 11.1 Remote Node Proﬁle Fields (continued)

Field Description

Nodeconf.fm Page 3 Tuesday, October 10, 2000 3:19 PM

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 141 142

Comments to this Manuals

No comments

Netgear RH348 User Manual Page 65

Comments to this Manuals

Related products and manuals for Routers Netgear RH348