Netgear RH348 User Manual download pdf (Page 52)

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

3-8 Router Configuration

Figure 3-4 shows Menu 2 - ISDN Setup for North America.

Figure 3-4. Menu 2 - ISDN Setup for North America

DSS1 ISDN Menu

Use the commands described in Table 3-1 and Table 3-2 to display Menu 2 - ISDN Setup for

DSS1. When you ﬁnish entering the information for all the ﬁelds, do the following on both menus:

• Press [Enter] at the Press ENTER to Conﬁrm prompt to save your selections.

• Press [Esc] to cancel.

When you press [Enter], the router uses the information that you enter to initialize the ISDN

link to the telephone company switch.

The router asks if you want to test whether or not your ISDN line has been successfully

connected to your router. When you select Yes, the router performs a loopback test to check

the ISDN line. If the loopback test fails, note the error message that you receive and take the

appropriate troubleshooting action. Refer to Chapter 10 for troubleshooting information.

Config.fm Page 8 Tuesday, October 10, 2000 3:17 PM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 141 142

No comments

Netgear RH348 User Manual Page 52