Netgear RH348 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Router Installation and Connection 2-7
Connecting the Serial Cable (Optional)
Plug one end of the 9-pin RS-232 cable into the MGR (manager) port on the router. Plug the other
end into a serial port (such as COM1 or COM2) of your PC. You must use the included 9-pin
to 25-pin adapter if your PC has only a 25-pin port available.
Connecting to the ISDN Port
In regions where the S interface version of the router is used, the ISDN cable will have two 8-pin
RJ-45 connectors. Plug one end of the cable into the ISDN port of the router and connect the other
end to an NT1 (Network Termination) device, a DSU device, or an S-interface wall jack.
In regions where the U interface version of the router is used, your ISDN cable will have an 8-pin
RJ-45 connector on one end and either an 8-pin RJ-45 (earlier versions) or a 6-pin RJ-11 (later
versions) connector on the other end. Plug one 8-pin connector into the ISDN port of the router.
Connect the other end of the cable directly to your ISDN wall jack. Your wall jack may have either
an 8-pin RJ-45 or a 6-pin RJ-11 connector. A 6-pin cable connector will plug into the center of an
8-pin wall jack, but if you have a 6-pin jack and an 8-pin cable connector, you must either change
the jack or get a cable with two 6-pin connectors.
Connecting the Ethernet Cable
The Model RT328 router supports two types of Ethernet connections. Follow the procedure that is
appropriate for your installation.
Warning:
Several of the connectors and connection cables are very similar. It is
important that you use the correct cable for each connection and that you do not
connect the ports incorrectly, because serious damage to your router could result.
Install.fm Page 7 Tuesday, October 10, 2000 3:16 PM
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 141 142

Comments to this Manuals

No comments