Netgear RH348 User Manual download pdf (Page 94)

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

8-14 Filter Configuration

Applying the Filter

When the ﬁlter design is ﬁnished, you must tell the router where to apply the ﬁlter. Apply it as a

Call Filter in the remote node that reaches your DNS server(s) (usually your ISP node). Go to

Menu 11.1, Remote Node Proﬁle, and enter the number of the ﬁlter under “Call Filter Sets” as

shown in Figure 8-6. If you have multiple ﬁlters, you can cascade up to four by entering their

numbers separated by commas.

Figure 8-6 shows the Remote Node Proﬁle Menu.

Figure 8-6. Remote Node Proﬁle Menu

When you ﬁnish, restart the router.

Menu 11.1 - Remote Node Profile

Rem Node Name= MyISP Edit PPP Options= No

Active= Yes Rem IP Addr= 0.0.0.0

Call Direction= Outgoing Edit IP= No

Incoming: Telco Option:

Rem Login= Transfer Type= 64K

Rem Password= ******** Allocated Budget(min)= 0

Rem CLID= N/A Period(hr)= 0

Call Back= N/A

Outgoing: Session Options:

My Login= netgear Input Filter Sets=

My Password= ******** Output Filter Sets=

Authen= CHAP/PAP Call Filter Sets= 1 <<- APPLY

Pri Phone #= 18005551212 Idle Timeout(sec)= 300

Sec Phone #=

Press ENTER to Confirm or ESC to Cancel:

Filter.fm Page 14 Tuesday, October 10, 2000 3:25 PM

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 141 142

No comments

Netgear RH348 User Manual Page 94