Netgear RH348 User Manual download pdf (Page 55)

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

Router Configuration 3-11

Ethernet Setup

Menu 3 is for conﬁguring the Ethernet LAN parameters, including interface type, ﬁlters, DHCP,

and IP address information. From the Main Menu, enter 3 to display Menu 3 – Ethernet Setup.

There are two submenus: Menu 3.1 – General Setup and Menu 3.2 – TCP/IP and DHCP Setup.

Refer to the following sections for descriptions of these submenus. Refer to Table 3-1 on page 3-3

for information about navigating through the menus.

General Setup Menu

The General Setup Menu determines the type of Ethernet interface you are using and the ﬁlter sets

you want to implement to monitor your Ethernet trafﬁc. Refer to Table 3-6 for a description of

each ﬁeld in this menu.

Table 3-5 lists and describes the interface and ﬁlter choices in the Ethernet General Setup menu.

Table 3-5. Ethernet General Setup Menu Fields

Field Description

Ethernet Interface

(Model RT328 router only)

The router supports two types of Ethernet connections, AUI (15-pin) or

UTP 10BASE-T (telephone type connector). Determine which type you

are using and select the appropriate option in this ﬁeld.

Input and Output Filters

Sets

Input and Output Filter Sets: Filter sets are used to block certain

packets, to reduce trafﬁc, and to prevent a security breach. Leave these

ﬁelds blank until you have conﬁgured the ﬁlters. Refer to Chapter 8,

“Filter Conﬁguration,” for more information about conﬁguring ﬁlters.

Config.fm Page 11 Tuesday, October 10, 2000 3:17 PM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 141 142

No comments

Netgear RH348 User Manual Page 55