Netgear RH348 User Manual download pdf (Page 66)

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

5-4 Remote Node Configuration

Editing PPP Options

To edit PPP options:

Select Yes in the Edit PPP Options ﬁeld of Submenu 11.1 - Remote Node Proﬁle.

Press [Enter] to display Menu 11.2 Remote Node PPP Options.

Edit the options described in Table 5-2.

Press [Enter] at the Press ENTER to Conﬁrm... prompt to conﬁrm your selections, and

return to the previous menu.

Press [Esc] at any time to cancel your selections.

Continue to the end of Menu 11.1 and press [Enter] to save the selections you made in

Menu 11.2.

Session Options:

Output Filter Sets

Call Filter Sets

In these ﬁelds, select which ﬁlter set(s) you would like to implement to ﬁlter the

incoming and outgoing trafﬁc between this remote node and the router. You can

choose from 12 different ﬁlter sets. In addition, you can link up to 4 ﬁlter sets

together for further customization (for example, 1, 5, 9, 12). Spaces and commas

are accepted in this ﬁeld. The default is blank (no ﬁlters are deﬁned). Refer to

Chapter 8, “Filter Conﬁguration,” for more information about conﬁguring ﬁlters.

Idle Timeout (sec) This value speciﬁes the number of idle seconds elapsed before the remote node is

automatically disconnected. Idle seconds is the period of time where no data is

passed between the remote node and your router. Administrative packets such as

RIP are not counted as data. The default is 300 seconds (5 minutes).

Table 5-1. Menu 11.1 Remote Node Proﬁle Fields (continued)

Field Description

Nodeconf.fm Page 4 Tuesday, October 10, 2000 3:19 PM

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 141 142

No comments

Netgear RH348 User Manual Page 66