Netgear RH348 User Manual download pdf (Page 62)

Reference Guide for the Model RT328 and Model RH348 ISDN Routers

4-4 Configuration for Internet Access

Conﬁguration for Single User Account

The Model RT328/RH348 router implements NAT (IP masquerading), allowing the use of a

single-user account for Internet access. The steps for conﬁguring your router for single-user

Internet access are similar to those for conventional Internet access, with the exception that you

need to ﬁll in three extra ﬁelds. To conﬁgure your router for single-user Internet access, follow

steps 1 through 6 from the previous section, “Internet Access Conﬁguration.” You must provide the

following additional information in step 7 before proceeding to step 8 and step 9:

• Single User Account

Enter Yes to enable the Single User Account feature. Use the space bar to toggle between Yes

and No.

• Single User Account: IP Addr

If your ISP assigns you a dynamic IP address, enter 0.0.0.0 here. If your ISP assigns you a

static IP address, enter that IP address here.

• Single User Account: Server IP Addr

If you want to make your local server (for example, a Web server) accessible to outside users,

enter the IP address of that server here. Incoming packets with destination port numbers not

handled by the router will be forwarded to this server address.

Internet.fm Page 4 Tuesday, October 10, 2000 3:18 PM

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 141 142

No comments

Netgear RH348 User Manual Page 62