Netgear RANGEMAX WNDR3300 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Configuring Basic Connectivity 1-7
v1.0, February 2008
If your ISP has assigned you a permanent, fixed (static) IP address for your computer,
select Use Static IP Address. Enter the IP address that your ISP assigned. Also, enter
the subnet mask and the gateway IP address. The gateway is the ISP’s router to which
your router will connect.
Domain Name Server (DNS) Address. If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select Use These DNS Servers, and
enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address
is available, enter it also.
Router MAC Address. This section determines the Ethernet MAC address that the router
will use on the Internet port. Typically, you would leave Use Default Address selected.
However, some ISPs (especially cable modem providers) register the Ethernet MAC
address of the network interface card in your computer when your account is first opened.
They then accept only traffic from the MAC address of that computer. This feature allows
your router to masquerade as that computer by “cloning” or “spoofing” its MAC address.
To change the MAC address, select one of the following methods:
Select Use Computer MAC Address. The router will then capture and use the MAC
address of the computer that you are now using. You must be using the one computer
that is allowed by the ISP.
Select Use This MAC Address, and type it in here.
Does Your Internet Connection Require A Login?. If you usually must use a login
program such as WinPOET to access the Internet, your Internet connection requires a
login. After you select Yes , the Basic Settings screen displays, as shown in the following
figure.
Note: If you enter or change a DNS address, restart the computers on your
network so that these settings take effect.
Note: After you finish setting up your router, you will no longer need to start the
ISP’s login program on your computer to access the Internet. When you
start an Internet application, your router will automatically log you in.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 133 134

Comments to this Manuals

No comments