Netgear RANGEMAX WNDR3300 User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
5-10 Fine-Tuning Your Network
v1.0, February 2008
To configure port triggering, you need to know which inbound ports the application needs. Also,
you need to know the outbound port number that will trigger the opening of the inbound ports. You
can usually determine this information by contacting the publisher of the application or user
groups or newsgroups.
To set up port triggering:
1. Select Port Forwarding/Port Triggering under Advanced in the main menu. The
Forwarding/Port Triggering screen displays.
2. Select the Port Triggering radio button. The port triggering information displays.
3. Clear the Disable Port Triggering check box.
Figure 5-3
Note: If the Disable Port Triggering check box is selected after you configure port
triggering, port triggering is disabled. However, any port triggering
configuration information you added to the router is retained even though it is
not used.
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 133 134

Comments to this Manuals

No comments