Netgear WN3000RP Installation Guide

Universal WiFi Range Extender WN3000RP Installation Guide

103. The web browser setup guide walks you through the following steps:• Selecting the Wi-Fi network you would like to extend.• Entering the

11Extender PerformanceThe Link Rate LED indicates performance. • The best performance is delivered when the Link Rate LED is green. • A

12When to Use the Extender Wireless NetworkNETGEAR recommends that you connect to the Extender wireless network only when a PC or wireless device is i

131-Port Wi-Fi AdapterOnce the Extender is connected to your existing Wi-Fi network, you can use the Ethernet port on the Extender to connect a device

14Wireless SSIDs and PassphrasesUse the space below to record your new Extender network name (SSID) and Extender security settings, in case you need t

15Frequently Asked QuestionsYou can find more information about your product in the User Manual available at http://support.netgear.com.1. The Smart

NETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134 USAApril 2012ComplianceDeclarations of ConformityFor complete DoC, visit the NETGEAR EU Declara

© 2012 NETGEAR, Inc. All rights reserved.No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or tra

3Hardware FeaturesThe LEDs on the front show how the Extender is working. WPS. The LED indicates a wireless connection.WPS Link Rate Status

4The side panel has the following features:• On/Off button. Turns the device on and off.• WPS button. Press the WPS button to wirelessly conne

5Getting StartedThe WiFi Range Extender extends the wireless network to include the area outside the range of your existing Wi-Fi network. Follow thes

6Connecting the Extender to an Existing Wi-Fi NetworkTo extend the range of your Wi-Fi network, you will need to connect the Extender to your existin

7Option 1: Connecting with WPS (Wi-Fi Protected Setup)1. Press the WPS button on the Extender. 2. Within 2 minutes, press the WPS button on your

8Option 2: Connecting with web browser setup guide1. Once the Extender is powered on and the Status LED is green, use a wireless network manager o

92. Open a web browser window from the same PC, and the browser should take you directly to the on-screen setup guide.Tip: You can always access the