Netgear RANGEMAX WNDR3300 User Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
Fine-Tuning Your Network 5-11
v1.0, February 2008
4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls
the inactivity timer for the designated inbound ports. The inbound ports close when the
inactivity timer expires. This is required because the router cannot be sure when the
application has terminated.
5. Click Add Service.
6. In the Service Name field, type a descriptive service name.
7. In the Service User list, select Any (the default) to allow this service to be used by any
computer on the Internet. Otherwise, select Single address, and enter the IP address of one
computer to restrict the service to a particular computer.
8. Select the service type, either TCP or UDP or both (TCP/UDP). If you are not sure, select
TCP/UDP.
9. In the Triggering Port field, enter the number of the outbound traffic port that will cause the
inbound ports to be opened.
10. Enter the inbound connection port information in the Connection Type, Starting Port, and
Ending Port fields.
11. Click Apply. The service appears in the Port Triggering Portmap table.
Figure 5-4
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 133 134

Comments to this Manuals

No comments