Netgear RANGEMAX WNDR3300 User Manual Page 116

  • Download
  • Add to my manuals
  • Print
  • Page
    / 134
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 115
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
7-10 Troubleshooting
v1.0, January 2008
Is your router set to a wireless standard that is not supported by your wireless card? Check the
Mode setting, as described in “Viewing and Configuring Basic ISP Settings” on page 1-5.
If your wireless network appears, but the signal strength is weak, check these conditions:
Is your router too far from your computer, or too close? Place your computer near the router,
but at least 6 feet away, and see whether the signal strength improves.
Is your wireless signal obstructed by objects between the router and your computer? See
“Optimizing Wireless Performance” on page 5-13.
If your wireless network appears and has good signal strength, configure your wireless card and
router for the simplest possible connection, as described in the next section.
Setting Up and Testing Basic Wireless Connectivity
Follow these instructions to set up and test basic wireless connectivity. Once you have established
basic wireless connectivity, you can enable security settings appropriate to your needs.
Note: If you use a wireless computer to change wireless settings, you might be
disconnected when you click Apply. Reconfigure your wireless adapter to match
the new settings, or access the wireless router from a wired computer to make any
further changes.
Page view 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 133 134

Comments to this Manuals

No comments