Netgear RANGEMAX WNDR3300 User Manual download pdf (Page 106)

NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual

6-14 Using Network Monitoring Tools

v1.0, February 2008

2. Under Allow Remote Access By, specify what external IP addresses will be allowed to access

the router’s remote management.

• To allow access from any IP address on the Internet, select Everyone.

• To allow access from a range of IP addresses on the Internet, select IP Address Range.

Enter a beginning and ending IP address to define the allowed range.

• To allow access from a single IP address on the Internet, select Only This Computer.

Enter the IP address that will be allowed access.

3. Specify the port number for accessing the management interface.

Normal Web browser access uses the standard HTTP service port 80. For greater security,

enter a custom port number for the remote management Web interface. Choose a number

between 1024 and 65535, but do not use the number of any common service port. The default

is 8080, which is a common alternate for HTTP.

4. Click Apply to have your changes take effect.

Note: For enhanced security, restrict access to as few external IP addresses as

practical.

Note: When accessing your router from the Internet, type your router’s WAN IP address

into your browser’s address or location field, followed by a colon (:) and the

custom port number. For example, if your external address is 134.177.0.123 and

you use port number 8080, then enter http://134.177.0.123:8080 in your browser.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 133 134

No comments

Netgear RANGEMAX WNDR3300 User Manual Page 106