Netgear GS752TXS Technical Information download pdf (Page 48)

48 | Chapter 2: Configuring System Information

GS752TXS Smart Switch Software Administration Manual

Auto-DoS Configuration

The Auto-DoS Configuration page lets you automatically enable all the DoS features

available on the switch, except for the L4 Port attack. See the previous section for information

about the types of DoS attacks the switch can monitor and block.

To access the Auto-DoS Configuration page, click System

 Management  Denial of

Service

 Auto-DoS Configuration.

To configure the Auto-DoS feature:

1. Select a radio button to enable or disable Auto-DoS:

• Disable. Auto-DoS is disabled (default).

• Enable. Auto-DoS is enabled. When an attack is detected, a warning message is

logged to the buffered log and is sent to the Syslog server. At the same time, the port

is shut down and can be enabled only manually by the admin user.

2. Click Apply to send the updated configuration to the switch. Configuration changes occur

immediately.

3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

DoS Configuration

The DoS Configuration page lets you to select which types of DoS attacks for the switch to

monitor and block.

To access the DoS Configuration page, click System  Management  Denial of Service 

DoS Configuration.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 48