Netgear GS752TXS Technical Information download pdf (Page 193)

Chapter 7: Managing Device Security | 193

GS752TXS Smart Switch Software Administration Manual

• Access Control Port (802.1X)

The RADIUS folder contains links to the following features:

• Global Configuration on page 193

• RADIUS Server Configuration on page 194

• Accounting Server Configuration on page 196

Global Configuration

Use the RADIUS Configuration page to add information about one or more RADIUS servers

on the network.

To access the RADIUS Configuration page, click Security  Management Security 

RADIUS

 Global Configuration.

The Current Server IP Address field is blank if no servers are configured (see RADIUS

Server Configuration on page 194). The switch supports up to three configured RADIUS

servers. If more than one RADIUS servers are configured, the current server is the server

configured as the primary server. If no servers are configured as the primary server, the

current server is the most recently added RADIUS server.

To configure global RADIUS server settings:

1. In the Max Number of Retransmits field, specify the value of the maximum number of

times a request packet is retransmitted to the RADIUS server.

Consideration to maximum delay time should be given when configuring RADIUS max

retransmit and RADIUS timeout. If multiple RADIUS servers are configured, the max

retransmit value on each will be exhausted before the next server is attempted. A

retransmit will not occur until the configured timeout value on that server has passed

without a response from the RADIUS server. Therefore, the maximum delay in receiving

a response from the RADIUS application equals the sum of (retransmit times timeout) for

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 193