Netgear GS752TXS Technical Information download pdf (Page 230)

230 | Chapter 7: Managing Device Security

GS752TXS Smart Switch Software Administration Manual

To configure MAC ACL interface bindings:

1. Select an existing MAC ACL from the ACL ID menu.

The packet filtering direction for ACL is Inbound, which means the MAC ACL rules are

applied to traffic entering the port.

2. Specify an optional sequence number to indicate the order of this access list relative to other

access lists already assigned to this interface and direction.

A low number indicates high precedence order. If a sequence number is already in use

for this interface and direction, the specified access list replaces the currently attached

access list using that sequence number. If the sequence number is not specified by the

user, a sequence number that is one greater than the highest sequence number currently

in use for this interface and direction will be used. The valid range is 1–4294967295.

3. Click the appropriate orange bar to expose the available ports or LAGs.

• To add the selected ACL to a port or LAG, click the box directly below the port or LAG

number so that a

√ appears in the box.

• To remove the selected ACL from a port or LAG, click the box directly below the port

or LAG number to clear the selection. An

√ in the box indicates that the ACL is

applied to the interface.

4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

5. Click Apply to save any changes to the running configuration.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 230