140 | Chapter 4: Configuring Switching Information
GS752TXS Smart Switch Software Administration Manual
10. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
MLD VLAN Configuration
MLD Snooping can be enabled on a per VLAN basis. It is necessary to keep track of the
interfaces that are participating in a VLAN in order to apply or remove configurations.
To access the MLD VLAN Configuration page, click Switching Multicast MLD Snooping
MLD VLAN Configuration.
To configure the MLD VLAN:
1. Set the VLAN IDs for which MLD Snooping is enabled in the VLAN ID field.
2. Enable MLD Snooping for the specified VLAN ID in the Admin Mode field.
3. Enable or disable the MLD Snooping Fast Leave Mode for the specified VLAN ID in the Fast
Leave Admin Mode field.
4. Use the Group Membership Interval field to set the value for group membership interval
of MLD Snooping for the specified VLAN ID. Valid range is (Maximum Response Time + 1)
to 3600.
5. Use the Maximum Response Time field to set the value for maximum response time of
MLD Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval -
1).Its value should be less than group membership interval value.
6. Use the Multicast Router Expiry Time field to set the value for multicast router expiry time
of MLD Snooping for the specified VLAN ID. Valid range is 0 to 3600.
7. Click Add to enable MLD Snooping on the specified VLAN.
8. Click Delete to disable MLD Snooping on the specified VLAN.
Comments to this Manuals