Netgear GS752TXS Technical Information download pdf (Page 31)

Chapter 1: Getting Started | 31

GS752TXS Smart Switch Software Administration Manual

Interface Naming Convention

The GS752TXS Smart Switch supports physical and logical interfaces. Interfaces are

identified by their type and the interface number. All the physical ports 1–48 are Gigabit ports

and Port 49–52 are SFP+ ports that support both 10G and 1000M mode. The number of the

port is identified on the front panel. You can configure the logical interfaces by using the

software. The following table describes the naming convention for all interfaces available on

the switch.

Interface Description Example

Physical The physical ports include Gigabit ports and are numbered

sequentially starting from one using the following format:

X/gY or X/xgY. X for the unit ID, g is for a 1G port, xg is for a

10G port, and Y is the port number.

1/g1, 1/g2, 2/g3

Link Aggregation Group (LAG) LAG interfaces are logical interfaces that are only used for

bridging functions.

l1, l2, l3

CPU Management Interface This is the internal switch interface responsible for the

switch base MAC address. This interface is not

configurable and is always listed in the MAC Address

Table.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 31