Netgear GS752TXS Technical Information download pdf (Page 296)

296 | Appendix B: Configuration Examples

GS752TXS Smart Switch Software Administration Manual

criteria to a particular queue or redirect the traffic to a particular port. A default deny all

rule is the last rule of every list.

2. Apply the access list to an interface in the inbound direction.

The GS752TXS Smart Switch allows ACLs to be bound to physical ports and LAGs.The

switch software supports MAC ACLs and IP ACLs.

MAC ACL Example Configuration

The following example shows how to create a MAC-based ACL that permits Ethernet traffic

from the Sales department on specified ports and denies all other traffic on those ports.

1. From the MAC ACL screen, create an ACL with the name Sales_ACL for the Sales

department of your network (See

MAC ACL on page 227).

By default, this ACL will be bound on the inbound direction, which means the switch will

examine traffic as it enters the port.

2. From the MAC Rules screen, create a rule for the Sales_ACL with the following settings:

• ID: 1

• Action: Permit

• Assign Queue: 0

• Match Every: False

• CoS: 0

• Destination MAC: 01:02:1A:BC:DE:EF

• Destination MAC Mask: 00:00:00:00:FF:FF

• Source MAC: 02:02:1A:BC:DE:EF

• Source MAC Mask: 00:00:00:00:FF:FF

• VLAN ID: 2

For detailed information about MAC ACL rules, see MAC Rules on page 228.

3. From the MAC Binding Configuration screen, assign the Sales_ACL to Ethernet ports 6, 7,

and 8, and then click Apply (See

MAC Binding Configuration on page 229).

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 296