Netgear GS752TXS Technical Information download pdf (Page 148)

148 | Chapter 4: Configuring Switching Information

GS752TXS Smart Switch Software Administration Manual

1. Specify the number of seconds the forwarding database should wait before deleting a

learned entry that has not been updated. IEEE 802.1D-1990 recommends a default of

300 seconds. You may enter any number of seconds between 10 and 1000000. The

factory default is 300.

Note: IEEE 802.1D recommends a default of 300 seconds, which is the

factory default.

2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

3. Click Apply to apply to send the updated configuration to the switch. Configuration changes

take effect immediately.

Static MAC Address

Use the Static MAC Address Configuration page to configure and view static MAC addresses

on an interface.

To access the Static MAC Address Configuration page, click Switching Address Table 

Advanced

 Static MAC Address.

To configure a static MAC address:

1. To add a static MAC address entry

a. Select the VLAN ID corresponding to the MAC address to add.

b. Specify the MAC address to add.

c. Specify the interface associated with the MAC address.

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 148