Netgear GS752TXS Technical Information download pdf (Page 269)

Chapter 8: Monitoring the System | 269

GS752TXS Smart Switch Software Administration Manual

To access the Multiple Port Mirroring page, click Monitoring  Port Mirroring.

To configure Port Mirroring:

1. Select the check box next to a port to configure it as a source port.

2. In the Destination Port field, specify the port to which port traffic is be copied. Use the g1,

g2,...format to specify the port. You can configure only one destination port on the system.

3. From the Session Mode menu, select the mode for port mirroring on the selected port:

• Enable. Multiple Port Mirroring is active on the selected port.

• Disable. Port mirroring is not active on the selected port, but the mirroring information

is retained.

4. From the Mirror Direction menu, specify the direction of the Traffic to be mirrored from the

configured mirrored port(s). The default value is Tx and Rx.

• Tx and Rx. Enable both transmitting and receiving on the selected ports.

• Tx only. Enable only transmitting on the selected ports.

• Rx only. Enable only receiving on the selected ports.

5. Click Apply to apply the settings to the system. If the port is configured as a source port, the

Mirroring Port field value is Mirrored.

6. To delete a mirrored port, select the check box next to the mirrored port, and then click

Delete.

7. Click Cancel to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 317 318

No comments

Netgear GS752TXS Technical Information Page 269