Netgear WAG302v2 User Manual Page 98

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 97
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
C-14 Command Line Reference
v1.0, May 2006
Viewing and Configuring Management Settings
The commands in Table C-12 correspond to the pages on the Web UI under the Management
heading. This section includes commands for the following features:
Change Password
Remote Management
Upgrade Firmware
Backup and Restore
Reboot the System.
Table C-12 AP Management
Task Command
Set a password for admin
access to the AP.
set system password <password>
Enable Remote CLI Access
set ssh status up
Disable Remote CLI Access
set ssh status down
Enable SNMP
set snmp status up
Disable SNMP
set snmp status down
Set a Public Community name
set snmp ro-community <string>
Set a Private Community
name
set snmp rw-community <string>
Set an IP address to receive
SNMP traps
set traphost host <ip_address>
Upgrade the firmware
(requires a reboot)
firmware-upgrade <url>
Example:
firmware-upgrade tftp://1.2.3.4/upgrade.tar
firmware-upgrade file://1.2.3.4/tmp/upgrade.tar
Backup the configuration file
config download <url>
Example:
config download tftp://1.2.3.4/defaultcfg.xml
Restore the configuration file
config upload <url>
Example:
config upload tftp://1.2.3.4/defaultcfg.xml
Page view 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 104

Comments to this Manuals

No comments