Netgear WAG302v2 User Manual Page 48

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 47
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
3-2 Management and Information
v1.0, May 2006
Remote Management
To access the Remote Management screen:
1. Enter the LAN address of the WAG302v2 into the address field of your browser.
2. After you log in, click Remote Management under Management on the main menu.
3. Enter the Remote Management information.
Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote
access via Secure Shell and Secure Telnet. The default is Enable.
SNMP: Enable SNMP to allow the SNMP network management software, such as HP
OpenView, to manage the wireless access point via SNMPv1/v2 protocol.
Public Community Name: The community string to allow the SNMP manager to read the
wireless access point's MIB objects. The default is public.
Private Community Name: The community string to allow the SNMP manager to read
and write the wireless access point's MIB objects. The default is private.
Community Name for Traps: The community string associated with the IP address to
Receive Traps. There is no default value.
IP address to Receive Traps: The IP address of the SNMP manager to receive traps sent
from the wireless access point. The default is 0.0.0.0.
4. Click Apply to save your settings.
Figure 3-2
Page view 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 103 104

Comments to this Manuals

No comments