NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Command Line Reference C-17
v1.0, May 2006
Hotspot Settings
The commands in Table C-15 correspond to the Hotspot Settings page on the Web UI under the
Advanced heading.
Advanced Wireless Settings
The commands in Table C-16 correspond to the Wireless Settings page on the Web UI under the
Advanced heading. For information about the configuration options in this section, see
“Configuring Advanced Wireless Settings” on page 4-3.
Set the Primary DNS Server
set dhcp-server dns1 <ip_address>
Set the Secondary DNS Server
set dhcp-server dns2 <ip_address>
Set the Primary WINS Server
set dhcp-server wins1 <ip_address>
Set the Secondary WINS Server
set dhcp-server wins1 <ip_address>
Set the Lease
set dhcp-server lease <seconds>
Table C-15 Hotspot Settings
Task Command
View all HTTP redirect information
get http-redirect detail
Enable HTTP Redirect
set http-redirect status up
Disable HTTP Redirect
set http-redirect status down
Set the URL for the redirect
set http-redirect url <url>
Table C-16 Advanced Wireless Settings
Task Command
Enable Super-G Mode set radio wlan0 super-ag yes
Disable Super-G Mode set radio wlan0 super-ag no
Set the RTS Threshold
set radio wlan0 rts-threshold <0-2347>
Set the Fragmentation Length
Threshold
set radio wlan0 fragmentation-threshold <256-2346>
Table C-14 Advanced IP Settings (continued)
Task Command
Comments to this Manuals