Netgear WAG302v2 User Manual Page 56

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 55
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
3-10 Management and Information
v1.0, May 2006
Viewing the Available Wireless Station List
The Available Wireless Station List contains a table of all IP devices associated with the wireless
access point for the Wired Network Name (SSID)
From the WAG302v2 main menu, under the Information heading, click Available Wireless Station
List to view the list.
For each device, the Available Wireless Station List table shows the Station ID, MAC address, IP
Address, and Status (whether the device is allowed to communicate with the wireless access point
or not).
If the wireless access point is rebooted, the table data is lost until the wireless access point
rediscovers the devices. To force the wireless access point to look for associated devices, click the
Refresh button.
Figure 3-7
Note: A wireless network can include multiple wireless access points that use the same
network name (SSID). This extends the reach of the wireless network. Users can
roam from one access point to another, providing seamless network connectivity. If
this is the case, only the stations associated with this access point are shown in the
Available Station List.
Page view 55
1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

Comments to this Manuals

No comments