Netgear WAG302v2 User Manual Page 73

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 72
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
Advanced Configuration 4-13
v1.0, May 2006
If using DHCP, all WAG302v2 Wireless Access Points should be set to “Obtain an IP
address automatically (DHCP Client)” in the IP Address Source portion of the Basic IP
Settings menu.
All WAG302v2 Wireless Access Points use the same SSID, Channel, authentication
mode, if any, and encryption in use.
3. Verify connectivity across the LANs.
A computer on any LAN segment should be able to connect to the Internet or share files and
printers with any other PCs or servers connected to any of the three WLAN segments.
Note: You can extend this repeating by adding up to two more WAG302v2s configured in
repeater mode. However, since repeaters communicate in half-duplex mode, the
bandwidth decreases as you add repeaters to the network. Also, you can extend the
range of the wireless network with NETGEAR wireless antenna accessories.
Page view 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 103 104

Comments to this Manuals

No comments