Netgear WNR2000-200UKS User Manual download pdf (Page 8)

Hardware Setup

N300 WiFi Router

You can use the LEDs to verify status and connections. The following table lists and

describes each LED and button on the front panel of the router.

Table 1. LED and button descriptions

Button or LED Description

WiFi On/Off

button

Pressing this button for two seconds turns the WiFi radio in the router on and off.

WPS button

This button lets you use WPS to join the WiFi network without typing the WiFi password.

Power

• Solid green. The power is on, and the router is ready.

• Solid amber. When you apply power to the router

, the Power LED lights and turns

amber within a few seconds. This indicates that the self-test is running.

• Blinking green. A

firmware update is in progress.

• Off. Power is not supplied to the router.

Internet

• Solid green. The Internet connection is ready.

• Solid amber.

The router detected an Ethernet cable connection to the modem.

• Off. No Ethernet cable is connected between the router and the modem.

WiFi

• Solid green. The WiFi radio is operating.

• Off. The

wireless radio is off.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 8